|
Key Features of "Watt's Up"
power analyzer:
Measures energy (Wh), charge
(Ah), power (W), current (A) and voltage (V)
Connector to use a receiver
battery for measurement down to 0 V
Captures current peaks and
voltage minimums(droops)
Accurate & precise - 0.01 A
current and 0.01 V voltage resolutions
Rugged - handles 50 A
continuous and 100 A peak at 60 V
14 ga., 7 x 37 stranded, high
temp silicone rubber insulated wire without
connectors
Small & Light: 2.8" long x
1.7" wide x 0.83" thick (70 mm x 44 mm x 21 mm),
2.5 oz.
Acts like a wire so doesn't
affect model's performance. Precision current
sensing resistor,with only 0.001 Ohm resistance
and circuitry only draws 0.007 Amps
Uses DSP to increase ADC
resolution and differential measurement
amplifiers to increase noise immunity
Factory calibration stores
constants in EEPROM to compensate for component
tolerances
One Year Warranty
Complete User Manual
Quality made in USA to ISO
9001:2000 standards
Comes in cool colors!
Specifications:
Voltage 0-60 V, resolution
0.01 V. That's a 14 cell series li-poly pack!
Current 0-100 A peak, 50 A
continuous, resolution 0.01 A
Charge 0-65 Ah, resolution
0.001 Ah. That's ~32 Amps for two hours!
Power 0-6500 W, resolution
0.1 W. That's ~8.7 Horsepower!
Energy 0-6500 Wh, resolution
0.1 Wh. That's lifting a 50 pound model into
outer space (65 mi.)!
Operates from 4.0-60 V, 0 V
with optional receiver battery pack
16 x 2 STN LCD display
Powerful, 8 MIPS
micro-controller
|
