|
|
|
PROP SAVERS
THE PROP SAVER WILL HELP TO ABSORB SHOCK FROM PROPELLER BLADE WHEN THE PROPELLER HITS AN OBJECT. Screw one nut onto the drive shaft till the end //Put another nut into the center hole of propeller saver//Screw the propeller saver together with the nut putting in the center hole to the drive shaft, and screw it tight//Put the washer onto the drive shaft//Put in the propeller//Use the rubber band to fix the propeller in the method like shape 8 or so called butterfly.
Prop Saver for 1.5 / 3.0 / 3.2 mm shafts
Use for soft-mounting propellers to prevent damage in the event of a prop strike. Prop is secured to mount by a rubber o-ring. Adapter fits 1.5mm motor shaft and props with 4mm bores. Price $2.50 1.5mm shaft ADD TO CART 3.0mm shaft ADD TO CART 3.2mm shaft ADD TO CART Slofly Multisaver 3mm Prop Saver (GWS/APC)
One side fits GWS 6x3 to 12x8 props and the opposite side fits APC electric props. Fits 3mm motor shaft. Weight: 1.3 grams including screws Price $3.99 ADD TO CART |
PSO 1X2
Price $1.25 )
)
)
)
)
)
