HELICOPTER GYROS 

Price $38.50    ADD TO CART

ITEM : GW/PG03

[DIMENSION]  26.0x27.0x11.3 mm (1.02x1.06x0.45 in )

[Weight] 7.0 g  (0.285oz)  with Plastic Case

[Weight] 4.8 g  (0.169oz)  w/o Plastic Case

[Input Voltage]  4.8V~6.0 V

[Current Consumption]  10mA

[Gain Adjustment]  Single rate, non-remote

[Operation Temp.]  -5℃ ~ 60℃

[Applicable R/C System]  Futaba, JR, Hi-tec, Sanwa / Airtronics, Multiplex, GWS

INSTALLATION
Wiring and Connections (For Helicopters)

  

                                                                                                     

 

INSTALLATION
Wiring and Connections (For Helicopters)Price 

$48.00       ADD TO CART

ITEM : GWS PG-02 DUAL-RATE PIEZO GYRO

[DIMENSION]  28.5 x 26.5 x 11.0 mm (1.12x1.04x0.43 in)

[Weight] 11 g ( 0.39 oz)

[Weight] 13 g ( 0.46 oz)

[Input Voltage]  4.8V~6.0 Volts

[Current Consumption]  30mA (at 4.8V)

[Gain Adjustment]  Dual-Gain (Remote control)

[Operation Temp.]  -5℃ ~ +50℃

[Applicable R/C System]  Futaba, JR,Hi-tec, Sanwa/Airtronics, Multiplex, GWS

 

GWS PG-02 DUAL-RATE PIEZO GYRO INSTRUCTIONS
Note: Please read the instruction manual thoroughly before operation

 The PG02 has been designed using a new micro piezo sensor that has been specially developed for this state-of-the-art gyro system and features an ultra-rapid, super-accurate detection and response system.

PG-02 has dual-rate gain adjustment remotely controlled by auxiliary channel switch (or slide) on the transmitter and features greater crash and impact resistance with the special gyro mount; plus new circuit designed to improve temperature and neutral stability firmly defines the PG-02 as new industry standard in Precision Micro Peizo Gyro.

The PG-02's ultra-light weight (a mere 11.0 grams) and incredible compact size allow installation in all classes of helicopters, aircraft and other vehicles.
 

                                                                                                          

ITEM : GW/PG-01NP

[DIMENSION]  26.5 x 26.5 x 27.2 mm (1.04x1.04x1.07 in)

[Weight] 16g  (0.57oz)

[Input Voltage]  4.8V~6.0V

[Current Consumption]  30mA

[Operation Temp.]  -5℃ ~ +60℃           Price $49.00         ADD TO CART 

 

INSTALLATION
Wiring and Connections (For Helicopters)

 

DD TO CART    E-SKY HEADING HOLD GYRO          Price: $38.00      OUT OF STOCK    A

  Dimension:     22 x 22 x 12.4 mm
  0.87 x 0.87 x 0.49 in.  
  Weight with Plastic Case:     6.7 g / 0.24 oz  
  Weight without Plastic Case :     -  
  Input Voltage:     5.0V  
  Current Consumption:     -  
  Gain Adjustment:     On-Board  
    

  (EK2-0704A)

Heading Hold gyro for Honey Bee Cool, King, and other electric or nitro powered helicopters. Gain adjustable via trimmer on gyro. Works with 4 channel receivers, and can also use an additional channel for remote on/off switching of heading hold function. With indicator status indicator LED and built-in temperature compensation circuitry.

Walkera DS Heading Hold Gyro (WK-G011)

   Price $49.50                 Add To Cart

Dimension:     30 x 30 x 23 mm
1.18 x 1.18 x 0.9 in.  
  Weight with Plastic Case:     20.4 g / 0.72 oz  
  Weight without Plastic Case :     NA  
  Input Voltage:     4.0V - 6.0V  
  Current Consumption:     -  
  Gain Adjustment:     Remote or On-Board  
  Operating Temperature:     -5°C to +75°C  
Features:
bulletDigital advanced PI(proportional integration) Advanced Vector Control System (AVCS) Heading Hold
bulletReverse switch
bulletDigital Servo on/off Switch
bulletSensitivity and AVCS Mode Trimmer
bulletServo Travel Adjustment Trimmer
bulletControl Speed Trimmer
bulletRemote transmitter operation of AVCS mode and sensitivity adjustment
bulletIncludes mini screwdriver for trimmer adjustments and mounting tape