RC Electric Power Motor Mounts

A great selection of aluminum and plastic motor mounts for your brushed or brushless motors

 

Small & Compact

Material: Aluminum

Light Weight: 3.47g (0.12 oz)

Max. Motor Diameter: 28mm (1.10 inches)

Design for 10 mm Stick Mount

Two Directions to Install Mount

Fits all GWS Outrunner Brushless Motor / Easy to Adjust the Thrust Line

Price  $5.25  Add To Cart  

 

 

 

 

Price $1.25   OUT OF STOCK

Add to cart    OUT OF STOCK

GWEMM28T 

  • Mount motor on the front or back

  • With wiring recess on each side

  • Maximum Diameter: 28mm

  • Design for stick mount 10x10mm

  • Easy On & Easy Off
     

 

GW/EPM-300  ELECTRIC POWER MOUNT FOR 280   Price $1.25             Add To Cart

 

 

GW/EPM-100  ELECTRIC POWER MOUNT FOR 370   Price $1.25    Add To Cart 

 

 

GW/EMM-400A  ELECTRIC POWER MOUNT FOR 400 A   Price $2.50        Add To Cart

 

 

GW/EMM-400T  ELECTRIC POWER MOUNT FOR 400  Price $2.50  OUT OF STOCK     Add To Cart

 

 

Top Creations AXI 22/Mega Offset Stick Motor Mount

Weight = 7.3 Grams (with screws)
Mounts to 3/8" or 10mm Stick
Fits AXI 22 Series, Mega RCN 400 Series, MTM Outrunners, Feigao 130 Series, and any other motor using 16mm spacing under a 1.125" diameter.   

                                                                                                   Price $12.90         Add To Cart

 

 

Top Creations 13.5mm Planetary Offset Mount

Weight = 9.0 Grams
Fits Feigao 130 Series with 130 planetary gearbox.             Price  $15.90         Add To Cart

 

 

Aluminum Firewall Flush Mount (F913)

An anodized aluminum adapter for mounting 10mm stick mount type gearboxes and motor mounts on a flat firewall. Includes wood screws for firewall. Weight 8.8g. Picture shows the Hobby Electronics aluminum gearbox (not included) mated to the adapter.

                                                                      Price $7.50           Add To Cart

 

 

Aluminum Outrunner Brushless Motor Mount (F912) 

A quality anodized aluminum "stick" mount for brushless outrunner motors with 20mm screw spacing. Hex cap head motor mount screws included. Mount fits on standard 10mm square stick and has hole for securing with a wood screw (included). Fits MTM 300/400/450 and BP 8Y/12/21 outrunner motors. Weight: 6.9g

                                                                                                                                                          Price $9.95     Add To Cart