Price $46.00 

GWS-MC-2002DC QUICK CHARGER

ITEM: GWS-MC-2002

  • Input Voltage range:9~15V DC.

  • Step up-down converter, 4~12 cells of 50mAh~3000mAh Ni-Cd or Ni-MH pack can be charged rapidly.

  • Automatic Delta-peak cutoff prevents battery overcharge.

  • Output port polarity and short protection.

  • Maximum charge time: 90 minutes safety cutoff.

  • Charge current: 0.25~6A continuous.

  • Large scale current-meter.

  • Sturdy aluminum case and heat-sink for maximum heat dissipation.
 

 Price  $35.00              OUT OF STOCK

The CG-340 is an economically priced field charger capable of charging either NiCd or the latest NiMh cells. With an adjustable charge rate it can charge a wide variety of TX, RX, and small power packs.
Applications: 4-16 cell NiCd or NiMh 50-3000 mAh battery Packs
Input Voltage: 9-13.9 Volts DC
Min Input Amps: 4.0
NiCd Charge Rate: 4-5 Cell - 0.2-1.5 Amp.
6-16 Cell - 0.2 -3.0 Amp.
NiMH Charge Rate: 4-16 Cell - 0.2-1.5 Amp.
  • Peak Charge
  • Delta Peak Cut Off
  • NiCd or NiMh Capable
  • "No False Peak" Circuitry
  • Auto Shut Off After 2 hours
  • Adjustable NiCd Trickle charge
  • Fully Adjustable Charge Rate
  • MOS-FET Drive Control with L
 

Plantraco LPC-400 Charger for Lithium Polymer and Lithium Ion Cells

Price $49.95      OUT OF STOCK

  
  • Now includes female JST connector.
    NOTE: This charger does not come with an instruction sheet. On the charger itself it has the LED indicator key. When you plug a battery in, hold the "Start" button down for 10 seconds. The charger will show a blinking red LED indicator for charge-in-progress.
  • Reliable Charging - microprocessor controlled charging cycle prevents battery damage. Does the job right.
  • Versatile - Select 1 cell, 2 cell pack, or 3 cell pack. Charge rate can be set from 50 - 400 mA, so you can do a "quick" charge at up to 400 mA rates if desired, or you can charge at 50mA to get every last bit of energy into your cells. The Charger can operate on 12 VDC if needed for charging 1 and 2 cells (18VDC wall adapter is needed to charge 3 cell packs).
  • Built-In Safety Features - helps to prevent the user from damaging cells with incorrect settings.
  • Dimensions (4.5" x 2.5" x 2")
  • Weight - 1 lbs
  • AC Adapter - 18 VDC 600mA - 1 lbs
  • Input AC adapter 18 VDC, 600 mA
  • Box dimensions: (4.5" X 4.25" X 3.5") 2 lbs
  • Packing - Cardboard Gift Box with manual
  • Manufacturer Warranty - 90 Days
Plantraco's LPC-400 Lithium Polymer Charger will correctly and safely charge individual lithium polymer cells as well as 2 and 3 cell "packs". The charge cycle is microprocessor controlled and adheres to the charging specifications of all "Lithium Polymer" battery manufacturers. The charging regimen is correct for Lithium-Ion, Lithium-Ion-Polymer, and Lithium Polymer cells. The charger is capable of charging lithium polymer (Lithium-Ion-Polymer) cells ranging in capacities from 45 mAh - 3000+ mAh.

Worley Multi-Cell Mult-Rate (MCMR) Lithium Polymer Charger

Price $49.95               OUT OF STOCK

 

Cell selector switch
LED Status indicator
Current Selector Switch
DC 12v Input Jack
Output cable

• 1-4 cell Lithium Ion or Polymer battery charger
• Input voltage: 12v DC
• Selectable output voltage: 3.7v, 7.4v, 11.1, 14.8v
• Selectable output current: 300-600-900-1200-1500-1800mA  

  • CAUTION:
  • MCMR is solely designed for Li-Poly Cells only
  • Charging Rate should always be set a 1C (Max) set by user
  • Do not Disassemble
  • Make sure variable switches are set correctly
    * Wrong setting of voltage charging mode will result in permanent damage to cells.
    * Wrong setting of current mode will result in shortening the life-span of the cells/pack

E-TEC Apache Smart Charger 2500  

Price

  • Charges 1-4 Lithium Polymer cells
  • 12V input
  • Selectable charge rates: 240mA, 700mA, 1200mA, 1700mA, 2500mA
    		•

     

     

     

    E-TEC Apache Smart Multi- Charger 2030  

      Price $39.95
  • Compact - Reliable - Intelligent - SAFER
  • Supports Li-Poly: 1 to 3 cells
  • Supports Ni-MH: 1 to 8 cells
  • Supports Ni-Cd: 1 to 8 cells
  • Automatic cell count select on Ni-MH and Ni-Cd
  • Manual cell count select on Li-Poly
  • Input voltage: 10.5V ~ 15V
  • Selectable output voltage: 4.2V (per cell)
  • Selectable charge rates: 110mA, 250mA, 500mA, 750mA, 1200mA
  • Reverse polarity & short circuit protection system
  • Automatic switches to "Trickle Mode" when charging complete
  • Dimensions: 90mm x 48 mm x 11mm / 3.546 x 1.8912 x 0.4334 in.
  • Includes instruction sheet
    		•

     

     

     

     

     

    E-TEC Apache Smart Charger 2020      

    Price $34.95

  • Compact - Reliable - Intelligent - SAFER
  • Li-Poly battery only
  • 1 to 3 cells (3.7V, 7.4V, and 11.1V)
  • Input voltage: 10.5V ~ 15V
  • Selectable output voltage: 4.2V (per cell)
  • Selectable charge rates: 110mA, 250mA, 500mA, 750mA, 1200mA
  • Reverse polarity & short circuit protection system
  • Dimensions: 90mm x 48 mm x 11mm / 3.546 x 1.8912 x 0.4334 in.
  • Includes instruction sheet
    		•

     

     

     

     

     

    Hitec / Multiplex Charger / Discharger

     

    Price $82.75

    Comes with a handsome aluminum case, the MULTIcharger LN-5014 will safely charge and discharge all Lithium, NiCad, NiMH and Lead-Acid battery packs and cells. An easy to read, Illuminated digital LCD screen displays battery type, charge/discharge, mAh, voltage and charging time, enhancing the charging experience. To ensure proper use, the LCD screen will also display error messages for out-of range input voltage, incorrect connection or reversed polarity, poor battery condition and internal errors. This easy to use charger, with its 4 button control panel and logical menus, is compact and simple to transport to the flying field or track. Comes with a set of output cables with alligator clips.

     

     

    550B is a high performance micro-processor controlled Li-ion/LiPo balancing charger. The 550B is fully programmable allowing you to set charging parameters including charging time, current, charging end conditions, and more.
    The built-in balancer automatically detects and balances each cell voltage of the 2 to 5 cells in series. The 550B monitors the voltage of each cell during the charge process to equalize the peak voltage. With temperature sensor the 550B's processor monitors the temperature of the battery being charged. You can control maximum charging temperature to ensure a safe charging process.
    Price  $ 78.95
    1. Charge And Balance Mode:
    		2. Charge Direct Mode:
    		3. Charge Direct And Balance Mode:
    Three working modes:
    1. Charge and balance through balancing connector conversion board.
    2. Charge directly to battery output lead, charge quick with no balancing.
    3. Use both balancing connenctor and direct connect to battery output lead for charging and simultaneously balancing at higher amperage for larger capacity packs.

    Includes:


      Input Voltage     DC 10-18V  
      Input Current     6A  
      Output Voltage     21V (21.25V Max)  
      Output Current     5A Max  
      Output Power     50W Max  
      Dimension     126 x 77 x 25 mm  
      Input Lead     Power Supply Jack (6mm OD)  
      Output Lead     4mm banana to alligator clips  
      Weight     300 g / 10.5 oz