sail winch servos,marine servos, water environment servos,sail boat servos,hitec servo,

SAIL WINCH SERVO

SAIL WINCH SERVO MODEL #S125 The NEW S-125 T Sail Winch servo is based on GWS best design and structure. It will offer you a reliable and durable operation. To match the different demands, this model offers a water environment construction and a 360 or 180 degree turn, along with two ball bearings to smoothly place the sail into position. This servo comes with installation accessories and very detailed instructions which walk you through a good installation process.

SAIL WINCH servos S125 SERIES GWS Servos

1253t-2.jpg picture by seakey1022

ITEM	2BB	Size( LxWxH ) mm/in	Weight		4.8V			6V
			Weight		Speed(sec)	Torque		Speed(sec)	Torque
			g	oz	Speed(sec)	kg-cm	oz-in	Speed(sec)	kg-cm	oz-in
S125 1/2T Half Turn 180deg $18.00	●	40.5x20x42 1.59x0.79x1.65	50	1.76	0.78 秒/180° (0.26秒/60°)	6.6	92	0.64 秒/180° (0.21秒/60°)	7.6	106
S125 1T Full Turn $18.00	●	40.5x20x42 1.59x0.79x1.65	50	1.76	1.56秒/360° (0.26秒/60°)	6.6	92	1.28秒/360° (0.21秒/60°)	7.6	106

S125 Three Turn Servo $25.00

S125 SIX Turn Servo $27.00

ITEM

2BB

Size( LxWxH )

mm/in

Weight

4.8V

Speed(sec)

Torque

Speed(sec)

Torque

kg-cm

oz-in

kg-cm

oz-in

S125 6T D

●

1.76

1.56/360°

(0.26/60°)

9.2

128

1.28/360°

(0.21/60°)

10.2

142

FEATURES: These sail boat winch servo have water and dust-tight seals for the case and shaft. // Dual ball bearings support for shaft. // Precise durable gears for accurate position and backlash. // Integrated circuit provides strong standing torque and stability. // Indirect drive for the gear train protection. // 92 oz. of torque with 4.8v or 106 oz. of torque on a 6 volt system.

Thses servos are wired with the "S" connectors which will work with Futaba / Hitec / JR / and Airtronics Z receivers. A tremendous advantage when you have multiple radios.

We also have Hitec Sail Servos HS-765 HB/ HS 785HB/ HS-815/BB / HS 715/BB click on link below for details:

HITEC SAIL SERVOS

FEATURES:

Water and dust-tight seals for the case and shaft. // Dual ball bearings support for shaft. // Precise durable gears for accurate position and backlash. // Integrated circuit provides strong standing torque and stability. // Indirect drive for the gear train protection. // 92 oz. of torque with 4.8v or 106 oz. of torque on a 6 volt system.

Thses servos are wired with the "S" connectors which will work with Futaba / Hitec / JR / and Airtronics Z receivers. A tremendous advantage when you have multiple radios.